1 877-822-6622

Home / Rubber Flooring / EGrip III Adhesive 4 Gal Pail

EGrip III Adhesive 4 Gal Pail

SKU# AC1008

EGrip III Adhesive 4 Gal Pail, Rubber Tile Adhesive

Be the First to Write a Review
$214.60/each (You Save 20%)
Reg: $268.25/each - $0.00/sqft
Be the First to Write a Review
Ships Out: Estimate 11-14 Working Days Ship times are typical, inquire for immediate availability.
Click to show more
About this item

Top Features for EGrip III Adhesive 4 Gal Pail

  1. Easy to trowel and apply
  2. Solvent Free
  3. No mixing required
  4. Excellent curing cycle
  5. Very low odor
  6. Non-flammable
Use Types

Max Playground Rubber Tile, Rolled Rubber Eureka, UltraTile, Performance Rolls and MX Outdoor Rubber Tile products.


Ships via ground or freight delivery on pallets.

This Product Ships UPS Ground, FedEx Ground and/or Freight.
Please review our shipping disclaimer.

is a one-component, solvent-free, urethane adhesive is a revolutionary zero VOC-calculated product featuring low odor and improved tack properties for easy application and flat, concealed seams. Egrip III adhesive coverage using 1/8 inch square notched trowel: 60SF per gallon over concrete 50SF per gallon over asphalt

Read More

In Stock
Q & A
Ask a question about this product

Product Questions:

How can we clean access glue of from rubber flooring ? What can we use ?
Once the adhesive has cured, it is extremely difficult to remove. You will want to take extra precautions not to damage the surface area. There are urethane adhesive removers on the market. Before removing the adhesive, cover the surrounding surface from splashes or spills of the remover. If you have an order from us, please call your sales representative to discuss.
What trowel would I use to install Centaur CS97A, 50 foot rolls?
1/16 ̋ square- notched trowel
What trowel would I use to install Centaur CS97A, 50 foot rolls?
1/16 ̋ square- notched trowel
Do you have to wait for it to dry before rolling the flooring over it? Or is it a wet application?
The rolled rubber should be installed over wet adhesive. Spread the adhesive using the proper size square-notched trowel. Take care not to spread more E-Grip III than can be covered with flooring within 30 minutes. The open time of the adhesive is 30–40 minutes at 70°F and 50% relative humidity.
SKU# AC1008
In Stock Yes
Width 0.00 feet
Length 0.00 feet
SF per Item 0.00
Weight 58.00 lbs
Packaging Shrink Wrapped on Pallets
Non Absorbent Yes
Special Adhesives Yes
Interlock Loss 0.00 feet
Interlocking Connections No
Installation Method Glue down
UV Treated No
Reversible No
Border Strips Included No