Gym Rubber Flooring Experts | Meet The Sales Team >
Categories
Chat

Home / Flooring Accessories / Adhesive For Rubber Floors 3.5 Gal

Rubber Flooring Adhesive, 3.5 Gallon Pail Size, Greatmats Rubber Urethane Glue

Adhesive For Rubber Floors 3.5 Gal

SKU# RFA3.5AM
(4 Reviews ) Write a Review
$111.00 per Carton On Sale - Reg: $138.75 per Carton - In Stock
Ships Out 1-3 Working Days Ship times are typical, inquire for immediate availability.
Purchase by the container of 3.5 gallons
Thickness Less than 2 mm
Length 0.00 feet
Width 0.00 feet
Weight 43.00 lbs
Manufacturer Warranty 5 Years
DESCRIPTION⌃ Back to top

Top Features for Adhesive For Rubber Floors 3.5 Gal

  1. 100 SF Coverage per Gallon
  2. Trowel Down Installation Method
  3. Waterproof Urethane Based Glue
  4. Long Lasting Permanent Installation
Use Types

Rubber Flooring Installations, Glue Down Installations, Cork and Rubber Flooring Underlayment Surface Installations


Our urethane is appropriate for rolled rubber, rubber tiles, and cork underlayments. Use when installing over fully cured concrete, primed lightweight concrete, plywood and OSB substrate. Coverage is approximately 100 SF per gallon for rolled rubber, rubber tiles and cork underlayments.


This rubber flooring adhesive offers great value and durability. Urethane based rubber flooring adhesive makes this a waterproof installation.

Acceptable Substrates:
Fully Cured Concrete
Primed Lightweight Concrete
Plywood
OSB

Open Time: 90 minutes

Trowel Size:
Rubber: 1/16 x 1/16 inch V-notch trowel
Cork Underlayment: 3/32 in V or U-notch trowel

Cure Time: 12 hour minimum

Installation Tips

If the correct trowel and the surface is relatively smooth, expect average coverage per gallon of material, and if the surface is a little more open or rough, the yield will go down.

If the adhesive is cold, it will be difficult to trowel and the yield will go down. Also, if it is
cold, you will leave more in the bucket, which will impact the yield. Only use the adhesive at room temperature.

If they use a 3/32 inch V vs. a 1/16 inhc V, expect the yield to go down by about 1/3.

For the urethanes and other high viscosity adhesives you need to have more
adhesive in front of the trowel. It makes it easier to push around and leaves a more uniform
coating on the floor.

Shipping

Ships via ground or freight delivery on pallets.

This Product Ships UPS Ground and/or Freight.
Please review our shipping disclaimer.


NOTE: This item is a custom order and is not returnable.

SPECIFICATIONS⌃ Back to top
In Stock Yes
Thickness Less than 2 mm
Width 0.00 feet
Length 0.00 feet
SF per Item 0.00
Weight 43.00 lbs
Packaging Cartons
Number of Pieces per Package Type 20
Non Absorbent Yes
Special Adhesives Yes
Interlock Loss 0.00 feet
Interlocking Connections No
Made In USA
Installation Method Glue Down
UV Treated No
Reversible No
Border Strips Included No
Manufacturer Warranty 5 Years
PDF DOCUMENTS⌃ Back to top

 View Specifications Data Sheet


 View Material Safety Data Sheet



Q & A⌃ Back to top
REVIEWS⌃ Back to top

Customer Rating:


It's ok.


Burlington, MA

Customer Rating:


Easy to spread and covers exactly the area it says it does.


WELLINGTON, FL

Customer Rating:


Doesn't take much, this stuff is excellent!


Greenup, KY

Customer Rating:


Great product, shipped quickly, and was easy to use.


Brooklyn, OH