Polagard AG 3 Gallon 2 Part
Polagard AG 3 Gal 2 Part Garage Floor Tile Protectant
Ships Out: Estimate 1-3 Working Days Ship times are typical, inquire for immediate availability.
Click to show more
About this item
Description
DESCRIPTION
Use Types
NOTE: This item is a custom order and is not returnable.
Shipping
Top Features for Polagard AG 3 Gallon 2 Part
- Extremely tough, hardwearing, waterproofing protective coating
- Easy to apply by brush, roller or airless spray
- Highly resistant to gasoline, dripping oil, lubricants and road salt
- Prevents rubber tire staining. No hot tire pick-up
- Sets quickly and develops strength rapidly
- Graffiti can be removed repeatedly without damaging or sacrificing POLAGARD AG or the substrate
- Protects your investment by increasing the effective service life of the substrate
- Protects concrete, plastic, rubber tiles, and most common surfaces
concrete, stucco, mineral composites, bricks/masonry, fibreglass composites, metals, EIFS, insulation, porous stone, non-porous stone, wood, wood composites, structural steel, industrial equipment and other surfaces.
NOTE: This item is a custom order and is not returnable.
Polagard AG 3 Gallon 2 Part is an anti-graffiti aliphatic urethane that cures to form an extremely tough, hard-wearing, protective coating. It will vigorously protect the substrate against graffiti and vandalism, weather, chemical attack and abrasion.
Polagard AG is the garage floor coating designed for industrial strength protection. Polagard AG is a two-component, polyurethane consisting of a resin plus hardener that are mixed together to initiate a cross-linking reaction. After application to the surface, the Polagard AG dries, then hardens to form a clear, tough, flexible surface coating. The dense structure formed by the reaction of these two components prevents penetration by stain-producing chemicals from motor fluids to car tire preservatives. The chemical resistance and abrasion resistance of Polagard AG allow it to be cleaned repeatedly without marring its appearance. Polagard AG may also be used to protect walls, benches, ramps, and sumps and other exposed surfaces in your garage.
Polagard AG Part A should be added to Polagard AG Part B and stirred thoroughly for 3 minutes, using a mechanical E.P. rated mixer. After the air bubbles from mixing have been released, the Polagard AG may be applied by brush, roller, or airless spray. Application to porous or highly textured surfaces may require two coats to obtain complete protection.
Coverage area is 250 SF coverage per gallon, per coat. 750 SF for this container size of 3 gallons.
Polagard AG Part A should be added to Polagard AG Part B and stirred thoroughly for 3 minutes, using a mechanical E.P. rated mixer. After the air bubbles from mixing have been released, the Polagard AG may be applied by brush, roller, or airless spray. Application to porous or highly textured surfaces may require two coats to obtain complete protection.
Coverage area is 250 SF coverage per gallon, per coat. 750 SF for this container size of 3 gallons.
Shipping
Ships via ground service or ships via freight delivery, shrink wrapped on pallets.
This Product Ships UPS Ground, FedEx Ground and/or Freight.
Please review our shipping disclaimer.
Q & A
Q & A
Ask a question about this product
Product Questions:
Can this be applied to old concrete with repaired cracks?
Yes. This can be applied to repaired, old concrete.
Specs
SPECIFICATIONS
SKU# | PAG3 |
In Stock | Yes |
Width | 0.00 feet |
Length | 0.00 feet |
SF per Item | 0.00 |
Weight | 66.00 lbs |
Packaging | Cartons |
Number of Pieces per Package Type | 1 |
Non Absorbent | Yes |
Special Adhesives | Yes |
Interlock Loss | 0.00 feet |
Material Hardness | Shore A 97 |
Interlocking Connections | No |
Made In | USA |
Installation Method | Apply with Brush, Roller, or Spray |
UV Treated | Yes |
Reversible | No |
Border Strips Included | No |
Pdf Docs
Also Viewed Products
Products