What is the difference between plastics used for flooring?
Top 3 Flooring Plastics - Learn How and Why They are Used
By Brett Hart
Are you confused by all of the acronyms used to identify different plastics used in flooring? PE, PP, PVC, LDPE, MDPE, HDPE, PEX. What does it mean, and why should you care? Here's the lowdown.
Polyethylene (PE), polypropylene (PP) and polyvinyl chloride (PVC) are three most commonly-used thermoplastics in the flooring industry. (Thermoplastics become soft and moldable upon heating and solidify again when cooled.) Each have different features that affect how well they work for certain applications. Here's how it works.
Polyvinyl Chloride Flooring
PVC can be rigid (RPVC) or flexible. RPVC is usually used for piping, doors, windows, bank cards and non-food packaging, but it can be brittle. With the addition of phthalates (chemicals used to soften plastics), RPVC becomes softer and more flexible and can replace rubber in many instances which is where it becomes useful in flooring.
PVC flooring is inexpensive and versatile. Chlorinated PVC is resistant to fire, oils and many chemicals. It can also withstand extreme environmental conditions.
In the flooring industry, PVC is popular due to its ability to prevent dirt buildup and fend off breeding of microbes in areas that need to be kept sterile. Its waterproof properties make it a popular material for outdoor patio tiles and sports courts.
Note: There is some concern over phthalates' health effects on humans as some studies have shown certain phthalate exposures to coincide with changes in hormone levels and increased birth defects in rodents. Phthalates typically do not persist in outdoor environments due to biodegradation, photodegradation and anaerobic degradation.
PP is free of bisphenol A (BPA), a common chemical in use for making plastics since the 1960s that has been found to seep into food or beverages, causing concern over possible health effects on the brain and prostate glands.
It is a lightweight, strong and flexible plastic that is resistant to high heat - up to 200 degrees Celsius. PP is also resistant to corrosion, chemicals and moisture.
Polypropylene has a wide variety of uses, including packaging, thermal underwear, carpeting, laboratory equipment and automotive components. In the flooring industry, PP is often used for garage floor tiles, due to durability and load rating properties as well as chemical resistance.
Polyethylene for Foam Floors
PE is the most common plastic and comes in several different densities. Medium and high density polyethylene (MDPE and HDPE) have a melting point range of between 120 and 180 degrees Celsius. Low density polyethylene (LDPE) melts between 105 and 115 degrees Celsius. LDPE, MDPE and HDPE are all resistant to strong acids and bases as well as gentle oxidants and reducing agents.
One third of all toys are manufactured from HDPE which has high tensile strength. Cross-linked Polyethylene (PEX) foam used in gymnastics mats generally uses HDPE and provides a firm and strong closed-cell material. This material does well rebounding to its original shape, providing bounce, cushion and/or shock absorption.
MDPE has good shock absorption and is more resistant to notching and stress cracking than HDPE. MDPE is often used for gas pipes, bags and packaging film.
LDPE is more likely to deform under tensile stress. It is commonly used for both rigid containers and plastic films.
With all the pros and cons to each kind of plastic, it is important to think carefully about how and where these materials should and will be used.