Bounce Back Playground Tile 1.75-2.5 Inch Black
Outdoor Bounce Back Recycled Rubber Playground Tile 1.75-2.5 In Black
Top Features for Bounce Back Playground Tile 1.75-2.5 Inch Black
- Ships from the Northwest USA
- Made in the USA
- Recycled rubber content makes this a green product
- Non slip outdoor rubber safety surfacing
- 2.5 inch are 6 foot ASTM fall height and IPEMA rated rubber tiles
- UV resistant
- 10 year limited warranty
- Great option for west coast customers
Rubber Playground Flooring, Playground Safety Surfacing, Rock Wall Climbing
Black Bounce Back Rubber playground mats are available as 2 x 2 ft tiles. The 2.5 inch thick mat provides a 6 foot fall height rating. This outdoor playground mat is dependable and can be found in playgrounds across the country. It provides long-term rubber playground mat surfacing while offering ADA accessibility when used the available ADA border ramp edging.
Our Bounce Back rubber playground surfacing is a popular and dependable outdoor option that can be found in playgrounds throughout the country. It provides long-term safety while offering ADA accessibility when used with our ADA border ramp edging. This rubber surface tile is available in many varieties of thicknesses, with the largest being 4 inches.
Unlike other surfacing options such as wood chips or loose-fill sand or gravel, these tiles do not have to be continually raked to maintain a safe surface for your playground. The solid design of these playground surface tiles makes it impossible for foreign objects to hide out of sight. This provides a safer environment for children. Also, unlike poured-in-place rubber surfacing, you don't have to replace your entire surface if some of the higher-wear areas begin to wear down. If you have a tile that's wearing down because of heavy use (maybe it is under a swing set or at the base of a slide) you can simply replace that tile. No patching or excessive labor is required.
Fall Heights in Feet:
6 Feet equals 2.5 inch thickness
8 Feet equals 3.5 inch thickness
10 Feet equals 4.00 inch thickness
Made in the USA with recycled content.
With colorful EPDM mixed color options, this rubber surfacing is sure to enhance the appearance of any playground. This tile is an excellent safety surface. It will last for years and perform with whatever weather conditions you are faced with.
Each year over 200,000 children are injured on playgrounds in the United States. Many of these injuries result from children falling onto inadequate surfacing. Bounce Back Playground Tiles take great steps to protect children while maintaining an attractive and durable rubber tile design. Outstanding features of these tiles include:
Safety: Bounce Back Playground Tiles 2.5 inch thick and greater are designed to meet federally mandated Critical Fall Height requirements for playground equipment up to 10 feet tall. These rubber playground tiles have been certified to comply with these requirements by IPEMA through TUV/SUD, which is a third party, independent testing/certification laboratory. Additionally, the manufacturer conducts regular, in-house Critical Fall Height testing as part of their Quality Control plan.
No other playground surfacing material offers the degree of safety assurance that rubber tiles can provide. Wood and rubber mulch products are easily displaced, resulting in inadequate thickness/protection in large areas of the playground. They also present an undesirable and dangerous material that children can swallow, throw or kick. Poured-in-place products are subject to climatic variation during installation, which makes the durability and lifespan of the material unpredictable. Bounce Back Tiles eliminate these problems and offer the assurance of safe surfacing for children's play areas.
Color Options: Bounce Back tiles are available in two color options: EPDM and Color Topped. The first is a surface wear layer of colored EPDM rubber granules. A second color option is a surface layer of colored tire crumb rubber. This economical option includes Black, Red, Blue, and Green. Tiles with these colors can used in combination to create very appealing playground designs.
Design Flexibility: With a full complement of ancillary shapes including inside corners, outside corners and beveled edges, Bounce Back tiles allow for a multitude of playground design options to enhance the ground level play options for children.
Durability: Made from durable SBR tire rubber, Bounce Back tiles offer durability unmatched by any other surfacing option. They will provide a safe surface for children to play on for many years.
Installation Ease: Bounce Back tiles can be easily and economically installed over a variety sub-surfaces. Once an installation sub-surface has been properly prepared, the tiles can usually be installed by the customer's maintenance crew. This cannot be said of poured-in-place surfacing, which requires expensive contractors and specialized equipment to effectively install.
Maintenance Ease: Bounce Back Tiles are virtually maintenance free; there is no need for time consuming maintenance or expensive annual replenishment like mulch products. Most cleaning simply involves a broom, garden hose or leaf blower. Replacing damaged tiles is as easy as removing the tile and installing a new one. This is not the case with other playground options which require costly and unattractive poured-in-place surface repairs.
Moisture Permeability: Bounce Back tiles are designed to allow rainwater to flow through the tile surface and away from the playground, as opposed to forming puddles on the surface. This allows children to resume play after bad weather sooner than they could on other surfaces such as poured-in-place.
Environmental: Bounce Back Playground Tiles are made from 100% recycled rubber and a specially engineered polymer binder. Because of the high level of recycled material in each tile, these products meet and exceed the requirements set forth in U.S Executive Order 13101, Greening the Government, and they can be a contributing factor towards LEED Green Building certification.
American Made Quality: We are proud to state that these Bounce Back Tiles are made in the USA. These playground safety tiles are covered by the manufacturer's industry leading 10 Year Limited Warranty.
These outdoor rubber tile are manufactured using recycled rubber buffings or crumb rubber from reground automotive tires. Black or color from the rubber material will rub off to some extent under normal use. This is common contact wear with this type of rubber tile in this product family type.
Ships via freight delivery, shrink wrapped on pallets.
This Product Ships Freight Only.
Please review our shipping disclaimer.
Can this be easily moved if needed? We will soon begin construction and will need to move our play structure from it's current location.
Will water go through the mats when it rains or will the mats not let the water through?
Do you ship to other countries
|SF per Item||4.00|
|Packaging||Shrink Wrapped on Pallets|
|Number of Pieces per Package Type||60|
|Interlock Loss||0.00 feet|
|Surface Finish||Smooth flat|
|Surface Design||Solid color|
|Installation Method||Glue down|
|Border Strips Included||No|
|Manufacturer Warranty||10 year limited|