Performance Beast 10.5 mm Rolls per SF
Sound Absorbing High Color Performance Beast 10.5mm Rubber Rolls/SF
Steel Appeal 2
Dark Gray Premium
Mocha Latte 2
Top Features for Performance Beast 10.5 mm Rolls per SF
- Shock and sound absorbent
- Fade resistant
- Wears well
- Slip resistant wet or dry
- Indoor only
- Cardio, light weights, moderate weights, strength equipment and extreme weights
Fitness centers, health clubs, and more.
Performance Beast 10.5 mm Rolls are designed for heavy strength training. It combines a 2.5 mm wear layer that resists scuffing and marking with a tailored 8 mm base layer to create a unique product.
Stacked Performance Beast Rolls with itstru-8 Stacked Technology. Consisting of 8mm - 8032 Underlayment with a 2.5mm EPDM Surface Wear Layer for a combined product height of 10.5 mm.
With a durable wear layer made to resists the scuffing and marking that is common in strength and conditioning applications. In applications where heavy weights are being dropped, durability is key; thus, requiring a product with higher energy restitution, like Performance Beast. Performance Beast surface is design for heavy strength training. This system features a base layer that maximizes energy restitution. This dual system is engineered to maximize durability in applications dominated by free weight training.
Recycled rubber flooring is on the rise because of its positive environmental attributes. Benefits, such as high-recycled content, low-VOC emissions, and low life-cycle costs, make it an environmentally preferable flooring solution for a number of applications.
Performance Beast Rolls are manufactured from recycled materials and slight variance in shade and color chip dispersion is normal. It is the installer's responsibility to inspect all products to insure the correct style, thickness, and color. Any moderate to severe discrepancies should be reported immediately before beginning the installation.
This product features two layers of material and required two layers of glue down installation.
Tensile Strength - ASTM D 412 >200 PSI
Flexibility 1/4 inch mandrel - ASTM F 137 Pass
Thermal Conductivity - ASTM C 518 2.1 Btu-in/h-ft-F
Static Load Limit - ASTM F 970 @ 250PSI 0.004 inch Pass
Coefficient of Friction - ASTM D 2047 >0.9
V.O.C. Compliant - ASTM D 5116 Yes
Color Stability - ASTM F-1515 Good
Chemical Resistance - ASTM F-925 Good
Abrasion Resistance - ASTM D 3389 / EN 649 <1g, 1000 cycle
Resistance to Heat - ASTM F 1514 Δ E <8.0
Pill Test - ASTM D 2859 Pass
Vertical Deflection / Deformation - ASTM F 2772 0.5mm
Surface Effect Slip Resistance - ASTM F 2772 Pass
Ball Rebound - ASTM F 2772 100%
Force Reduction - ASTM F 2772 10%
Thickness size tolerance plus or minus .02 inches
4 ft width size tolerance plus or minus 3/4 inch
Please Note: Cut lengths for rolled rubber products are provided as a courtesy at no additional cost to customers. In come cases, the manufacturer may provide a cut length within two pieces of material. In other cases, the manufacturer may send material that is over or under the specified linear footage. In all cases, the manufacturer is required to supply the overall amount of material per order. It is common for rolled rubber jobs to have butt seams or cut end seams within one roll or run.
Damp mop with a microfiber mop or auto-scrub using an approved pad or nylon brush with E-Cleaner or neutral PH cleaner.Shipping
Ships via freight delivery, shrink wrapped on pallets.
This Product Ships Freight Only.
Please review our shipping disclaimer.
Beast vs Rallly...which one for a home gym on the 3rd floor of home? Room will have bike, dumbbells, bench, and area for jumping rope/stretching.
|SF per Item||1.00|
|Packaging||Shrink Wrapped on Pallets|
|Number of Pieces per Package Type||9|
|Interlock Loss||0.00 feet|
|Surface Design||Colored fleck|
|Installation Method||Glue down|
|Border Strips Included||No|
|Manufacturer Warranty||3 year limited|