Slip-Resistant Exhibit & Marine LonSpeck Topseal Vinyl Rolls 6 x 60 Ft

1. Smooth surface
2. Slip resistance
3. Speckled decoration
4. Interior or semi-exterior areas
5. Masks dirt
6. Easy to maintain
7. GreenAir®
8. Low VOC

The Lonseal Flooring Vinyl Rolls are 6x60 foot speckled flooring rolls have Topseal that has been applied in 30-micron layers, shielding the floor from wear due to discoloration, scraping and soiling. The rolls feature a speckle patterned look, which delivers a unique design effect.

LonSpeck® Topseal flecked surface comes in nine calming colors that make this flooring solution a very flexible choice in commercial areas like healthcare facilities, offices, educational settings, and showrooms. It can also be used as exhibition flooring, marine vinyl flooring, vinyl flooring for vehicles, and a sheet vinyl covering for multiple other applications. This speckled vinyl flooring roll comes with a factory-applied urethane finish that guards the surface and reduces scratching, making it regularly care and stress-free.

Lonspeck® Topseal by Lonseal® Speckled Vinyl Flooring

This durable, versatile, attractive commercial flooring makes masking dirt a breeze with its unique speckled design. Offering a smooth, slip resistant surface, it’s a great solution for interior or semi-exterior areas. It’s an eco-friendly, GreenAir and Low VOC product that is very easy to maintain.

This sheet vinyl roll is 60 feet long, 6 feet wide, and 2mm thick. It delivers 360 square feet and weighs 235 pounds.

Speckled Vinyl Flooring - Preparation & Acclimation

If installing vinyl sheet flooring on concrete, on plywood, or over particle board, make sure the manufacturer’s guidelines are followed for preparation and acclimation. This includes making the flooring and corresponding materials are correct for the installation project and ensuring that the site conditions will permit the ideal installation per Lonseal’s requirements. The installer should become familiar with the tools and products to be used, including adhesives, heat guns and nozzles, patching compounds, self-leveling underlayments, trowels, etc., as well.

It is critical that you store the flooring and assembly products in the installation area for a minimum of 48 hours prior to installation, with the flooring being kept in its packaging and standing on end. The optimal acclimation environment will be the same as the one the flooring will occupy after installation is complete. Otherwise, issues like buckling, edge curling, gapping at the perimeter, or seam separation could occur.

After acclimation, unroll and allow the flooring to lay flat, allowing for multiple hours, if needed.

Lonspeck® Topseal by Lonseal® - The Installation Method:

1. As needed, make relief cuts to fit the flooring to the installation area.
2. At seam locations, apply Lonseal Double Face Tape (DFT) at seam locations, if required.
3. For simple rooms or installations, select the sheet nearest the wall or perimeter and tube (gently fold the flooring over itself lengthwise) towards the center of the room. Be very mindful, and keep the radius large when tubing the material. If this isn’t done, damage to the flooring can occur, and visual imperfections may appear on the surface.
4. Apply the appropriate adhesive over the substrate, and after sufficient open time, roll the flooring into the adhesive.
5. After anchoring the first section down, tube the other half of the sheet, and the adjacent sheet, if present. Spread the adhesive over the substrate and seam location, including any DFT. After sufficient open time, roll the flooring into the adhesive, removing the DFT liner beforehand.
6. Continue this process until the entire area is fully adhered.
7. If necessary, trim the seams and roll the flooring securely into the adhesive or DFT with a hand roller.
8. Chemical weld or heat the seams.
9. Enjoy the flooring for years to come by following the appropriate maintenance procedures.

Lonspeck® Topseal Appropriate Maintenance & Cleaning:

Initial Maintenance

1. Once installed, wait 48 hours before beginning the initial maintenance procedure.
2. Clean the speckled vinyl flooring using a microfiber dust mop. If necessary, vacuum the floor to first pick up any large particles.
3. Using a properly diluted neutral pH cleaner, scrub the floor with a red buffing pad on a slow speed rotary floor machine or auto-scrubber, vacuuming up any remaining cleaning solution.
4. If necessary, use clean water and a clean microfiber mop pad to remove any remaining residue.

Routine/Daily Maintenance

1. Remove all dirt, debris, and soil.
2. Clean the flooring using a microfiber dust mop. If necessary, vacuum the floor to first pick up any large particles.
3. Apply a properly diluted neutral cleaner to the surface using a microfiber wet mop pad.
4. If necessary, use clean water and a clean microfiber mop pad to remove any remaining residue.

Periodic Maintenance

1. Remove all dirt, debris, and soil.
2. Take care if using a scraper or putty knife to avoid permanently damaging the surface of the flooring.
3. Clean the flooring using a microfiber dust mop. If necessary, vacuum the floor to first pick up any large particles.
4. Using a properly diluted neutral pH cleaner, scrub the floor with a red buffing pad on a slow speed rotary floor machine or auto-scrubber, vacuuming up any remaining cleaning solution.
5. If necessary, use clean water and a clean microfiber mop pad to remove any remaining residue.

This commercial grade product is a fabulous, smooth surfaced solution that is suitable for so many applications. Reach out to the customer service team at Greatmats for more information, or, for assistance placing your order. This product will look great and perform well for years to come.


FEATURES (data shown is nominal):
Roll Width: 6 ft. (1.8 m)
Roll Length: 60 ft. (18.3 m)
Overall Thickness: 0.080 in. (2.0 mm)
Wear Layer Thickness: 0.028 in. (0.7 mm)
Weight: 0.6 lbs./sq. ft. (3.1 kg/m²)

MEETS FMVSS 302: CFR 49 §571.302 Flammability of Interior Materials

ASTM F1303 CLASSIFICATION: Type I, Grade 1, Class B, Commercial Use

CERTIFIED: FloorScore®

EXCLUSIVE LONSEAL® FORMULATIONS: TOPSEAL, GreenAir® & GreenMedic®

LEEDv4/4.1 CONTRIBUTION Building & Construction Interiors:
Environmental Product Declarations Option 1
Sourcing of Raw Materials Option 2
Low-Emitting Materials
Pre-Consumer (Post-Industrial) Recycled Content

WARNING: California Proposition 65

Pattern: Flecks/Specks
Finish: Smooth
Width: 6 ft. (72 in.) (1.8 m)

Green Specs: RECYCLED CONTENT, ANTIMICROBIAL, FLOORSCORE, LOW VOC, CONTRIBUTES TO LEED V4/4.1, TOPSEAL, ASTM F1303 CLASSIFIED, FMVSS
Shipping

Ships via freight delivery

This Product Ships Freight Only.
Please review our shipping disclaimer.

Ask a question