Safety Wall Pad 2x5 Ft x 2 inch WB Z-Clip ASTM
PVC Vinyl Antibacterial Gym Safety Wall Pad 2x5Ft x 2in WB Z-Clip ASTM
Top Features for Safety Wall Pad 2x5 Ft x 2 inch WB Z-Clip ASTM
- Certified OSB
- Impact rated polyethylene foam
- Class A fired PVC Vinyl
- 2 inch thick foam
- 18 oz vinyl covering
- Leed certification
- Contains at least 60% recycled pre-consumer raw material
- Anti-Mildew, Anti-Fungus, Antimicrobial, Antibacterial treated
Gym Wall Pads, Basketball Court Walls, School Wall Pads, Wrestling Rooms, Martial Arts, Combat Training, Safe Rooms
Safety Wall Pad 2x5 Ft WB Z-Clip ASTM, Class A PVC vinyl 18 oz
Impact wall pads is an indoor stationary Safety Wall Pad 2x5 Ft x 2 inch WB Z-Clip ASTM, intended for direct wall connection.
Indoor stationary wall padding panel, intended for direct wall connection. The panel is a wood backed pad of inch Impact rated polyethylene foam bonded to the face using a two-part adhesion process. The foam and wood are covered front and sides then firmly stapled onto the back using Class A PVC Vinyl.
1. Backing - 7/16 inch Georgia Pacific Blue Ribbon® oriented strand board (OSB); Third-party
certified to the Sustainable Forestry Initiative® procurement standard, Exposure 1 bond
durability. Contains no added urea formaldehyde resins. Georgia-Pacific building
products can contribute to LEED® certification points.
2. Foam Layer - 2 inch polyethylene foam meets standards for ASTM 2440. The test method
quantifies impact in terms of g-max and Head Injury Criterion (HIC) scores. Promotes
closed-loop recycling of post-industrial scrap. Contains at least 60% and up to 100%
recycled pre-consumer raw material. The use of pre-consumer recycled material can
contribute to LEED® certification points.
3. Covering - 18 oz. laminated leather grain embossed vinyl BACshield: Anti-Mildew,
Anti-Fungus, Antimicrobial, Antibacterial treated, UV treated. Passes ASTM E84 (Class A),
NFPA-701 & Cal 117 FR tests C.P.S.I.A. Certified.
Typical panel to be manufactured at 24 inch width by specified height.
All columns and corners to be pre-fabricated to fit field condition
1. 1 inch Nail Margin top and bottom along width edge attached directly to wall using
appropriate hardware for wall type. Refer to ASTM standards for height above finished
floor. 4 inch AFF to bottom of foam current.
Ships via freight delivery shrink wrapped on pallets.
This Product Ships Freight Only.
Please review our shipping disclaimer.
|SF per Item||12.00|
|Packaging||Shrink Wrapped on Pallets|
|Interlock Loss||0.00 feet|
|Surface Finish||Smooth, Flat|
|Surface Design||Solid color|
|Installation Method||Direct screw on or Z-Clip|
|Border Strips Included||No|